You are here:  Home » 3D Dental Products » Dental 3D Printers » ProJet DP3510 – 3D System

ProJet DP3510 – 3D System

MP3510 & DP3510 3d printer


  • Email notification capability
  • Uniformly thin wax-ups
  • Push button operation
  • Extra large build area
  • Accurate and consistent parts
  • Wide range of indications for wax-ups

Call 281-583-7552 or contact us online to learn more about the DP3510 and get a quote.

Technical Specifications
Printing Modes: HD – High Definition
UHD – Ultra High Definition
Net Build Volume (xyz)
HD Mode: 298 x 185 x 203mm (11.75 x 7.3 x 8 inches)
UHD Mode: 203 x 178 x 152mm (8 x 7 x 6 inches)
HD Mode: 375 x 375 x 790 DPI (xyz)
UHD Mode: 750 x 750 x 890 DPI (xyz)
Accuracy (typical) 0.001-0.002 inch (0.025-0.05 mm) per inch of part dimension
accuracy may vary depending on build parameters, part geometry and size,
part orientation, and post-processing methods
Email Notice Capability Yes
5 Year Printhead Warranty Standard
Build Material
VisiJet® DP200 Build Material Formulated for exceptional castability
Support Material
VisiJet® S100 Support Material Non-toxic wax material for hands-free melt-away supports
Material Packaging Build materials in clean 2 kg cartridges (machine holds up to 2 with auto-switching)
Support materials in clean 2 kg cartridges (machine holds up to 2 with auto-switching)
Electrical 100-127 VAC, 50/60 Hz, single-phase, 15A; 200-240* VAC, 50 Hz, single-phase, 10A
Dimensions (WxDxH)
3D Printer Crated 838 x 1422 x 1753mm (33 x 56 x 69 inches)
3D Printer Uncrated 749 x 1207 x 1543mm (29.5 x 47.5 x 60.75 inches)
3D Printer Crated 401 kg (885 lbs)
3D Printer Uncrated 279 kg (615 lbs)
ProJetTM Accelerator Software Easy build job set-up, submission and job queue management
Automatic part placement and build optimization tools
Part stacking and nesting capability
Extensive part editing tools
Automatic support generation
Job statistics reporting tools
Network Compatibility Network ready with 10/100 Ethernet interface
Client Hardware Recommendation 1.8 GHz with 1GB RAM (OpenGL support 64 mb video RAM) or higher
Client Operating System Windows XP Professional, Windows Vista, Windows 7
Input Data File Formats Supported STL and SLC
Operating Temperature Range 18-28 ºC (64-82 ºF)
Noise < 65 dBa estimated (at medium fan setting)
Certifications CE
* Requires small external transformer supplied by 3D Systems in the provided country kit.
View manufacturer’s brochure